: On machines, what is the weight listed? I've always thought that the weight listed on a weight stack (putting the pin at 100lbs) meant that you were lifting 100lbs after all factors were taken into account. After reading

Vote Up Vote Down   0 Reactions

Login to give Reaction!

Here is a real-world example that you can verify for yourself in gyms with those large multi-station cable machines with a pull-up bar in the middle. Typically, they have a pair of lat pulldown stations, a pair of cable row stations, a pair of triceps pushdown stations, and the interior pair is a multi-purpose cable cross.

If you observe the pulleys for the triceps pushdown station and compare that against the pulleys for the cable cross station, you'll see that the cable goes through an additional pulley on the latter. This halves the force needed to move the same amount of weight (it also doubles the distance needed to pull the cable to lift the weight the same height off the stack but this is not relevant to the amount of exertion needed). So if you were to set up the stacks with the same amount of weight for these stations, and you configure one of cable cross station pulls to do the same triceps pushdown, you will find it easier on the cable cross station because you're only using half the effort.

So the takeaway is that the weight of the plates on a machine only tell part of the story in terms of the force needed to lift the weight, and it is the amount of force that relates to the exertion or effort. Consequently, for a machine of a given, fixed mechanical design, the relationship is also fixed, but it may vary from machine to machine. The only way to maintain comparability of the weight of the plate to the effort needed to lift it, is to look at the same machine or machines of equivalent design.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

The weight in which you are lifting does not perfectly correlate to the numbers on the stack.

The weighted plates that you put the pin into are showing the weight of the stack up to where the pin is. If you see the stack increasing in 10 lb increments that means that each plate is 10 pounds. Due to the mechanics of the machine, you are not necessarily doing 10 more pounds of work.

The best example of weights that actually show how much weight you're lifting would be with free weights.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

There is no direct relationship between the numbers listed on the stack, and the weight you're lifting.

It could well be that the marker with "100" indicated that the stack now weighs 100lb or 100kg, but since the machine uses pulleys, it leverages your force by a lot, so you're not actually lifting that much weight.

Also, since different manufacturers uses a different number of pulleys, and different sizes, and different lubrication, 100 is going to be different from machine to machine.

So the answer is yes; if you switched machine brand, 100 is going to feel different.

EDIT: To answer your question in the comments; no, they don't use pulleys to boost your ego. They use pulleys so that when you push forward on the machine, you're lifting the weight straight up. I mean, that's what pulleys do. They allow you to shift the direction of force.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

While the weights might not be consistent between different brands, the weight increases on a particular machine are consistent meaning the increase of approximately 10 pounds is the same whether you're going from 40 to 50 pounds or 80 to 90 pounds. The number doesn't exactly correlate to the weight you are lifting but it's still a useful number for tracking progression. If you went from 40 pounds to 50 pounds on the weight stack then you've gotten stronger, regardless of if you actually went from 37 pounds to 47 pounds once the leverages of the pulleys etc is taken into account..