: MIDI Keyboard controller and Windows Tablet I installed Mixcraft 7 on my iBall slide i701 and assigned all the VSTs I required for a particular song to different instrument tracks and pre-set the volume/pan of each. The plan

Vote Up Vote Down   0 Reactions

Login to give Reaction!

USB devices on tablets are a tricky matter.

First make sure you're using the right cable adapter from the microUSB/OTG port in your tablet, to the standard USB host (female) connector. Have your tried the conection with other devices (e.g. a simple memory pen drive)? Does the MIDI controller give any sign of life when connected (e.g. LEDs lightinh or flashing)?

If the connection works with other USB devices but not the MIDI controller, or you see the controller respond in some way but not be properly recognized by the host, then you may have a power problem. The tablet may not be able to supply enough power to the controller. This is a common enough problem for example with external USB hard drives, which required more current debit than the USB port of a tablet normally supplies. I have seen devices start (LEDs light, etc.) but not work properly untill an external USB power supply with sufficent current yeld is provided.
If that's the case then it may be able to be solved by an OTG cable adapter with a Y connection to allow the simultaneous connection of the power supply.

On another line of inquiry, can you see the controller in Windows's Device Manager? Check the article indicated above by Mathew, and specially this link here m-audio.com/kb/article/1619, for some clues by the manufacturer.