Combining Boss ME25 with an Amp
I play normally Heavy Metal, Progressive and Blues. I am pretty satisfied with distortion and lead/solo sounds I got using the Equalizer settings on my Boss ME25 Unit but, as far as clean sounds are concerned I cannot seem to adjust them on my Boss unit. Sometimes clean sound with delay/reverb for example sounds a bit distorted with the amp i am using now.
I would like to connect my Boss ME 25 processor to an Amp, the Amp I am using now is pretty old and I can't seem to make the right decision regarding a new one. Would any Amp do? Like Fender Champion 20 or so?
(1)1 Comments
Sorted by latest first Latest Oldest Best
The issue you've described boils down to gain, ultimately. You can set your Boss ME25 to produce a nice clean tone, but if the output volume is too high then it will still distort the preamp section of your amplifier. To get a totally clean tone, I would reduce the output volume of the ME25 and turn your amp up.
Having said that, you've not stated what amplifier you are using. A small tube amp will begin to 'break up' and distort unless you are careful, so I would look for an amp with a bit of clean headroom. It might ultimately be best to try a few out with your ME25. Given your mention of Fender's Champion 20 amp, I would guess you are after an affordable practice amplifier, of which there are many.
Terms of Use Privacy policy Contact About Cancellation policy © freshhoot.com2025 All Rights reserved.