: Setting up an electronic drum kit; volume differences for each component In setting up an electronic drum kit; what sort of volume differences should I apply to each component? When using earphones I tend to have everything

Vote Up Vote Down   0 Reactions

Login to give Reaction!

When I produce a track I have my snare drum slightly higher than the kick and then build the other elements around that. Hats much lower, tom/bongos at similar volume to main kick, as with cymbals.

It boils down to personal preference, but the most important element with electronic kits is to ensure the spectrum doesnt get muddy with hits striking the same frequencies.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

Having learned to play the drums "the hard way" (i.e. autodidact + electronic kit first; acoustic only really after a few years), I urge you to figure out the volume differences between instruments on an acoustic kit first, especially between different instrument families (snare, bass, toms, crash, ride, hats, etc).
Try to setup your electronic instruments to match their acoustic counterparts as closely as possible. That way you will get a much greater sense of playing dynamics (relation between your movements and the volume they create) in the long run.

This is of special importance if you spend most (I'd say more than half) of your time playing an electric kit.
Come to think of it, this whole dynamics thing was actually the hardest part of re-learning drums on an acoustic kit.

EDIT:

Considering the audio mix only, I'd go for different sound characteristics over volumes.
All modern e-drums worth their value have a decent sound library to pick from for every instrument. Leveraging that, you can achieve a clean mix with little to no volume differences (though they still should be considered, if only for above reasons).

Look for highly distinguishable sounds for every instrument family. It won't matter if all your crash cymbals have the same overtones, or your toms have the same type of shell (they all differ in size and, thus, pitch). Just make sure snare really sets itself apart from toms as well as your ride ain't just a larger crash.
For example, Roland's V-Drums classify their sound samples by materials or musical styles.
Pick some wildly different sounds initially and work your way from there.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

I would say it is all down to personal preference because essentially you could hit different components softer with an acoustic kit to get the effect you describe, unfortunately you don't get that privilege with an electronic kit (to a certain extent). Just play about with it; Record some flows and riffs and if one component is drowning stuff out, dampen it down a bit. You will eventually get a happy medium.

I would personally crank up the toms and bass drum as with metal the double kick is very poignant. Plus I tend to hit toms a lot harder than cymbals but I suspect an electronic pad wont react in the same way as a tom head when beaten harder, so compensating for that would benefit you in that case.