: Are there six-string, regular scale guitars (acoustic or electric) with strings ranging from low B to high B? Are there six-string, regular scale guitars (acoustic or electric) with strings ranging from low B to high B?

Vote Up Vote Down   0 Reactions

Login to give Reaction!

Not that I know sold as standard. But quite do-able using an ordinary guitar. No problems with the nut slots - and maybe those on the saddle. Strings would need swapping up, so the 2nd becomes the 1st, and so on. Then something like a .052"/.056" for the low B.

Tension would be similar, so no more strain on the neck. The intonation could be problematic, though. You notice how each string needs to be a little longer as they go lower. The bridge would be the decider here.

I did similar with a bass, and it's strung BEAD. no problems at all, but the saddles were all adjustable.

Vote Up Vote Down   0 Reactions

Login to give Reaction!

A competent luthier would be able to set up the nut and bridge contours after adapting this instrument. Good setup and intonation requires a total system approach, which takes into account nut and bridge height where each string touches them, string tensions, neck angle and neck relief, fret height and fret dress. Remember, when you fret a string, either individually or when chording, the string pitch will be going sharp compared with that of the strings which were tuned without pressing down on them. A proper setup is needed to even out the differences in how each string interacts with the neck and frets, and much more.
To go at this haphazardly will leave you chasing single problem issues, which more often than not will just make things worse. A proper overall setup should prevent any problems for a long, long time. And you would be getting the most out of your custom guitar right away. It's the important investment. Should not be too expensive when you've chosen the right luthier. Best of luck in your project, sounds creative indeed.